+86 13952112615

info@rilico.com

Xuzhou Lara Import & Export Co., Ltd.
XuZhou Lara Import & Export Co., Ltd.

Professional power solutions

At RILICO, we pay attention to the details that’s often overlooked by others, but they greatly determine the outcome of the products. Take Film Face Plywood for example. Most people pay attention only to the surface (to check the eveness) or the core (to check if its intact). However they do not check the moisture content of the board. A board with high moisture content, above 18%, means there are still water trapped within the layers of veneers. Often to save cost, the veneers do not go through the kiln dry machines. And even with air dry, the drying period has been shortened significantly. The end product will look fine at first. However when it reaches countries with little or no humidity like Saudi Arabia, The board's moisture content will shoot down to 5% and below in a matter of hours. When that happens,the moisture escapes through the plywood layers, diluting the glue structure thats holding the plywood together and results in de-lamination. In other cases it will cause the board to twist and warp. To prevent these problems, RILICO strictly enforces the inspection of moisture content of our Film Face Plywood to the standard of 12% and below. This will ensure the stability and utility of our products.

Head Office

PARKWOOD GLOBAL ( SINGAPORE)

Tel.: +65 6735 3805

Fax: +65 6735 3810

E-mail: rilico@singnet.com.sg

Address: 304 Orchard Road, Lucky Plaza#13-01

China Office #1

JIANGSU LARA INTERNATIONAL CO. ,LTD.

Tel.: +86 516 8657 9666

E-mail: kurtfeng@rilico.com

Address: C2A-515, No. 6 Software park Rd, Xuzhou, Jiangsu

China Office #2

XUZHOU LARA IMPORT&EXPORT CO. ,LTD.

Tel.:+86 516 8649 9888

E-mail: jeffwang@rilico.com

Address: Jianshe Road, Pizhou City, Jiangsu Province, China

Copyright © XuZhou Lara Import & Export Co., Ltd. All Rights Reserved | Sitemap | Powered by